Five ways to troubleshoot your HP LaserJet Printer
In the current scenario, there is the variety of printers
available in the market like Ink-Jet, Daisy-wheel and Dot-Matrix Printers, etc.
Among all the other printers HP Laser-Jet is leading the market because of its
high speed, superior text quality, and the performance. It offers faster speed
than Inkjet and others. It can print in higher volume and has lower running
cost. As HP Printers are well known for the quality and performance, there are
fewer chances for you to face any issue with it. And, in case you meet any
problem with HP; consult the experts by calling at HP
customer care support number.
Some of the common issues that you may face are:
·
Paper jams while printing.
It happens because of dust or damaged rollers. The
wrong type of paper used may also cause this problem. To resolve the issue, you
should clean your printer at regular intervals and use the right kind of paper
as specified in the manual to avoid any inconvenience.
·
If the printed page is faded.
If the setting of printer density is low or toner has
some issue; this problem occurs. It is
possible that Economode of your printer is on which is causing the problem. In
this situation, first of all, check your toner cartridge and install a new one
if required. If the Economode is on, then turn it off to resolve the issue.
Increase the print density and test the printing quality after making changes
to see if you are getting the desired results.
·
If your printer takes all the paper instead of
one sheet at a time.
It is possible that pad which is responsible for
separating the papers is worn out. So the best way is to replace it. Make sure
that papers installed in the tray are dry; so that they do not stick to each
other.
·
If the lighter duplicate image appears on the
printout.
There are two possible reasons for this; It is
possible that the power is insufficient and the other possibility is drum or
imaging kit is about to expire. See to it that power supply to your printer is
sufficient and replace the imaging kit if required.
·
If your printer stops working.
It may happen if there is a network error or printer
is not turned on. It is also possible that printer has some issue. So, to make
your printer work again, ensure that your printer is turned on and the
connection between your computer and printer is smooth. Check that the router
is working correctly and there is no ISP issue. In case the printer is
corrupted, contact the manufacturer.
Although there are many solutions available online targeting
various printing issues, still you may need an expert's assistance to resolve
your issue. The HP provides customer care services for its consumers to resolve
their issue any time they need. The experts at HP are available 24x7 to provide
you with an instant solution. You can either give a call at their customer care
number or write to them at HPcustomer care email address. Never hesitate to contact the HP Customer
Care Services as experts are there for providing the quick solution to your
problems. Use this facility and get best out of your HP Laser-Jet Printer.
Comments
Post a Comment