HP OfficeJet Pro 6830 problem with Print Head: How to Fix It?

Hewlett-Packard is one of the best printer brands, which gives quality with affordability. Frequently, the HP Office jet 6830 print-head issue operates because of excessive ink leakage. HP Office jet Pro 6830 gives All-in-One jobs at one platform. They provide you multi-task performance with high accuracy. But, being best does not mean that they cannot have troubles. This blog has been written how to troubleshoot the issues with Print Head. Certified technicians at Hewlett-Packard are available to provide you a complete HP customer service. Contact for Service is a reliable directory to get a trustworthy phone number so that you could avoid all type of inconvenience.

How can you fix HP Office jet Pro 6830 problem with Print Head?

•  In the first step, you will have to change the ink cartridge.
• To change ink cartridges, open the HP Office Jet Print-head printer cover.
• Now, it is necessary to disconnect the power cord. After this, you need to remove all the screws of the top cover of your printer. For this, use an appropriate flat head screwdriver or a star screw driver.
•  You should lift off the inner top cover.
•   To disconnect all the cables of printer, you need to lift off the inner top cover of printer gently.
•  To get an easy access of internal part of printer, you will have to place it on the side.
• To handle the plastic area correctly, it is better to create a good note of orientation section of the plastic location tape so that you could put it to place back again.
• You need to be very careful while you are ending left or right side.
•  Now, you will have to delete the tape in next tape now.
• In order to manage the print-head base, you will have to remove all screws from the base of print head to proceed further.
•  Now, you need to lift up this whole assembly with the print heads base.
• You make ensure not to disconnect any of the cables.
• You will have to clean Print heads.
•  You need to clean up the bottom of the print heads section with a lint-free wipe method.
•  Now, you will have to clean up carefully the bottom of the print head section with a lint-free wipe method.
• You need to put all things in its original place. Now, you will have to reverse all methods, which all here described.
•  Switch on the printer and open the control panel of printer.
•   It is necessary to swipe left and then go to the “Setup / Printer Maintenance.”
• You need to select “Clean Print head” icon carefully.
• You need to clean all print heads at last.
•   Technicians are available to provide you HP printer issues on a prompt basis.
•  Clean up Print head, the bottom of the print head section with a lint-free wipes method.
•  Next, simply put everything in its original place and the reverse all your above instructions described.
• Plug-in to electricity and start working.

After doing these steps, if the issues have not been resolved so far, you can contact to HP Printer Customer Support center. In order to get HP customer care number, you can use a reliable directory contact for service. Contact for Service contains a verified phone number of some reputed companies. Users should use the only reliable number to get instant certified solution regarding every problem.